Chassis Punches
Brand: TORK CRAFT
MPN: TCCP016
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 16 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 125.73
Ex VAT:N$ 109.33
Brand: TORK CRAFT
MPN: TCCP020
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 20 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 181.24
Ex VAT:N$ 157.60
Brand: TORK CRAFT
MPN: TCCP022
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 22 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 228.39
Ex VAT:N$ 198.60
Brand: TORK CRAFT
MPN: TCCP025
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 25 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 263.10
Ex VAT:N$ 228.78
Brand: TORK CRAFT
MPN: TCCP0254
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 25.4 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the d..
N$ 268.33
Ex VAT:N$ 233.33
Brand: TORK CRAFT
MPN: TCCP030
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 30 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 351.56
Ex VAT:N$ 305.70
Brand: TORK CRAFT
MPN: TCCP032
CHASSIS - SCREW - SHEET METAL PUNCH 32MM....
N$ 461.66
Ex VAT:N$ 401.44
Brand: TORK CRAFT
MPN: TCCP035
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 35 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 538.37
Ex VAT:N$ 468.15
Brand: TORK CRAFT
MPN: TCCP038
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 38 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 580.98
Ex VAT:N$ 505.20
Brand: TORK CRAFT
MPN: TCCP040
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 40 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 586.90
Ex VAT:N$ 510.35
Brand: TORK CRAFT
MPN: TCCP050
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 50 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 744.91
Ex VAT:N$ 647.75
Brand: TORK CRAFT
MPN: TCCP054
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 54 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 763.43
Ex VAT:N$ 663.85
Showing 1 to 12 of 12 (1 Pages)